Dhs. 1,250
Available in Stock Free Delivery on AED 200 & above 7 Day Easy Exchange


The D-Link Generation DGS-1210 (available in the market since 2018) offers more powerful hardware, greater port flexibility and more features. Model DGS-1210-48 (HW Revision G1) is a 52-port Gigabit Ethernet Smart Managed Switch without fan, suitable for SMB and Enterprise Enterprise networks. It has 48 RJ-45 ports, 10/100/1000Base-T and 4x Gigabit Combo RJ-45/SFP ports where SFP slots are two-speed and support Gigabit SFP and Fast Ethernet SFP modules.
The DGS-1210-48 switch offers IPv6 support and an advanced set of L2 features such as VLAN virtual networks, QoS service quality features, LACP line aggregation, IGMP Snooping multicast video streaming, STP/RSTP Spanning Tree protocols for round topologies, 802.1 security features x Radius or ACL.
Voice VLAN detects IP phone connections and automatically assigns them to a separate VLAN with higher priority. The new feature is a unique Surveillance mode that can detect IP camera systems (IP cameras, NVRs) from different vendors using MAC addresses, LLDPs and ONVIF protocols and automatically assign them to a separate high-priority video-VLAN. The switch also displays network topology directly in the web interface of the switch. This greatly simplifies and speeds up deployment and management of enterprise network and IP camera systems.

Manage the switch is from an intuitive web interface or SNMP commands. Compact Telnet CLI commands allow basic switch settings (IP address setting, password, reset, reboot, ping, FW upgrade, configuration upload/backup, show, debug). There is also a free D-Link Network Assistant (DNA) software tool that offers basic management and supervision over multiple network switches. The DNA tool scans the network and finds the switch even if its IP address (such as the default IP address) is not in the same L2 segment. Subsequently, basic settings, switching to workgroups, and bulk management, upgrade, or backup can be performed. In large enterprise networks, you can manage switches centrally using the advanced NMP D-View 7 platform (free for 25 devices, more info and online demo at http: //dview.dlink..com)



Number of 10/100/1000BASE-TX ports

  • DGS-1210-48 - 48 ports

Number of Combo 1000Base-T/SFP ports

  • DGS-1210-48 - 4 ports


Switch Capacity

  • DGS-1210-48 - 96 Gbps

64-Byte Packet Forwarding Rate

  • DGS-1210-48 - 71.4 Mpps

MAC Address Table Size

  • 16K

You may also like